Resumo: | O objetivo deste estudo é verificar a influência das temperaturas de envelhecimento sobre as propriedades mecânicas de uma liga de NiTi pseudoelástica com 56,5% de Ni, bem como a influência destes tratamentos nas fases presentes e microestrutura da liga. Para caracterizar a liga de estudo no estado como recebido e após envelhecimento a 350°C, 450°C, 550°C e 600°C, os seguintes ensaios foram realizados: análise microestrutural, microscopia eletrônica de varredura (MEV), calorimetria diferencial de varredura (DSC), medição do modulo de elasticidade e amortecimento interno. Dos resultados obtidos observou-se que a amostra T350 (envelhecida a 350°C ) apresentou uma fase intermediária, uma elevada dureza (36,8 HRC) e um baixo módulo de elasticidade quando comparado com as outras amostras. No entanto, a amostra T600 não possui fase intermediária em suas transformações de fases e possui menor dureza e maior módulo de elasticidade que a amostra em estado como recebido. ___________________________________________________________________________ ABSTRACT The main ambition of this study is to verify the influence of aging temperatures on the mechanical properties of a NiTi pseudoelastic alloy with 56,5% of Ni, as well as the influence of the aforestated heat treatments on the temperatures of the transformation phases and in the microstructure. To characterize the study in the as received state alloy and after ageing at 350° C 450° C, 550° C and 600° C, the following tests were performed: micro structural analysis, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), measuring the elasticity module and internal damping. The results obtained showed that the sample T350 (aged at 350° C) presented a R phase, a high hardness (HRC 36.8) and a low modulus of elasticity when compared with the other samples. However, the sample T600 didn`t had intermediate phase in their phase transformations and has less hardness and higher modulus of elasticity that the sample in a State as received. |